Thomson delivers multiple discoveries at Bygoo Tin Project
Published 21-JUN-2021 10:22 A.M.
|
3 minute read
Hey! Looks like you have stumbled on the section of our website where we have archived articles from our old business model.
In 2019 the original founding team returned to run Next Investors, we changed our business model to only write about stocks we carefully research and are invested in for the long term.
The below articles were written under our previous business model. We have kept these articles online here for your reference.
Our new mission is to build a high performing ASX micro cap investment portfolio and share our research, analysis and investment strategy with our readers.
Click Here to View Latest Articles
Thomson Resources (ASX: TMZ) has received further strong tin results from the recent drilling program at the company’s Bygoo Tin Project, located in the Lachlan Fold Belt in New South Wales.
This comes at a time when the metal is trading at near long-term highs, having just a fortnight ago for the first time since February 2011 surpassed the US$31,000 per tonne mark.
The tin price is being supported by strong demand for electronic components and devices, and this has coincided with a tightening in supply from Indonesia one of the world’s largest tin exporters.
Thomson’s latest results represent a major new tin discovery that lies 300 metres to the north-west of the main area of drilling.
As indicated below, within a broad zone of 118 metres at 0.43% in from a depth of 57 metres, several higher-grade zones were identified in BNRC69, including 19 metres at 1.0% tin from 87 metres.
The higher grade zone contains other mineralisation normally associated with promising tin discoveries.
A further new tin discovery was made just 50 metres north of the Main Zone with intersections in two holes, BNRC65D (2.4 metres at 0.6% tin) and BNRC73 (23 metres at 1.4% tin) - see above.
These holes were originally designed to test the Main Zone itself, but partially due to hole deviation, they tested areas further north.
An old hole, P380, dating from 1975 drilling by Cominco, had an intersection in this general area - 18 metres at 0.5% tin, but its location could not be verified.
The new “P380” greisen appears to be parallel and offset to the Main Zone.
Commenting on the results against the buoyant commodity price backdrop, executive chairman David Williams said, “It has been great to get back to work on the Bygoo Tin Project, given where tin prices are going, and it was a pity we ran out of time to continue the program given the exciting results we have achieved in this latest program.
"These latest results from the Bygoo Tin Project are highly encouraging and mark a further significant exploration success for Thomson.
"To come away with two new high quality tin discoveries demonstrates what a quality tin project Bygoo is.
"I will take 1%+ tin grades in shallow depths any day!
"The new discoveries themselves provide additional targets for follow-up drilling and allow greater opportunity to build out a meaningful tin resource at Bygoo which can incorporate the four mineralised areas.
"We have to wait now until the end of 2021 to get back there, but it will be a high priority for a comprehensive program at Bygoo straight up when we can get back on the ground.”
Drilling in established areas achieved partial success
The bulk of the drilling program sought to extend and delineate the known Main and Dumbrells Zones and had mixed results.
It was partially successful with good extensions for Dumbrells and Main Zone.
However, holes BNRC66, 70 and 71 either missed, or were unable to show continuity of higher-grade mineralisation.
On Main Zone holes BNRC65D and 73 it looked like they were pegged slightly too far north and only skimmed the edge of the Main Zone mineralisation.
This will be tested in the next drilling program at the end of 2021.
The full program as planned was not completed as there were several major delays due to rain, stubble burning and crop sowing.
As all four mineralised zones (Main, Dumbrells and the two new discoveries) are still open, more drilling is needed and a comprehensive program will be carried out at the first opportunity when the current crop is harvested in November.
Given the new discoveries, the company has decided to delay any resource definition until that drilling program has been undertaken and the full potential of the new greisens can be better understood and incorporated into the planned mineral resource drilling program.
General Information Only
S3 Consortium Pty Ltd (S3, ‘we’, ‘us’, ‘our’) (CAR No. 433913) is a corporate authorised representative of LeMessurier Securities Pty Ltd (AFSL No. 296877). The information contained in this article is general information and is for informational purposes only. Any advice is general advice only. Any advice contained in this article does not constitute personal advice and S3 has not taken into consideration your personal objectives, financial situation or needs. Please seek your own independent professional advice before making any financial investment decision. Those persons acting upon information contained in this article do so entirely at their own risk.
Conflicts of Interest Notice
S3 and its associated entities may hold investments in companies featured in its articles, including through being paid in the securities of the companies we provide commentary on. We disclose the securities held in relation to a particular company that we provide commentary on. Refer to our Disclosure Policy for information on our self-imposed trading blackouts, hold conditions and de-risking (sell conditions) which seek to mitigate against any potential conflicts of interest.
Publication Notice and Disclaimer
The information contained in this article is current as at the publication date. At the time of publishing, the information contained in this article is based on sources which are available in the public domain that we consider to be reliable, and our own analysis of those sources. The views of the author may not reflect the views of the AFSL holder. Any decision by you to purchase securities in the companies featured in this article should be done so after you have sought your own independent professional advice regarding this information and made your own inquiries as to the validity of any information in this article.
Any forward-looking statements contained in this article are not guarantees or predictions of future performance, and involve known and unknown risks, uncertainties and other factors, many of which are beyond our control, and which may cause actual results or performance of companies featured to differ materially from those expressed in the statements contained in this article. S3 cannot and does not give any assurance that the results or performance expressed or implied by any forward-looking statements contained in this article will actually occur and readers are cautioned not to put undue reliance on forward-looking statements.
This article may include references to our past investing performance. Past performance is not a reliable indicator of our future investing performance.
