Next Investors logo grey

Pacifico Minerals contemplates establishment of SXEW plant

Published 06-NOV-2017 11:58 A.M.


4 minute read

Hey! Looks like you have stumbled on the section of our website where we have archived articles from our old business model.

In 2019 the original founding team returned to run Next Investors, we changed our business model to only write about stocks we carefully research and are invested in for the long term.

The below articles were written under our previous business model. We have kept these articles online here for your reference.

Our new mission is to build a high performing ASX micro cap investment portfolio and share our research, analysis and investment strategy with our readers.

Click Here to View Latest Articles

Pacifico Minerals (ASX:PMY) informed the market on Monday morning that acid leach tests work on oxide copper mineralisation from the group’s Lorella prospect had returned highly positive results, indicating recoveries of more than 90 per cent with low acid consumption.

This news has triggered a share price surge of 25 per cent in the first 30 minutes of trading, supported by volumes of more than 10 million shares, well in excess of that normally traded in a full day.

The past performance of this product is not and should not be taken as an indication of future performance. Caution should be exercised in assessing past performance. This product, like all other financial products, is subject to market forces and unpredictable events that may adversely affect future performance.

PMY is a Western Australian based exploration company with interests in Australia and Colombia. In Australia the company is focussed on advancing the Borroloola West project in the Northern Territory.

The Borroloola West Project covers a region north-west of the McArthur River Mine (the world’s largest producing zinc – lead mine) with high potential for the discovery of world class base metal deposits.

The Lorella prospect lies 100 kilometres north-east of the McArthur River Mine. As indicated below, the Nathan River Road lies 7 kilometres to the west, and the Lorella Springs Road is 9 kilometres to the east, both unsealed public roads.

Pacifico lorella prospect

The Lorella project is part of the Borroloola West Joint-Venture (BWJV) which consists of 12 exploration licences and one mining licence with PMY holding a 51% stake in the joint venture and the remaining 49% held by Sandfire Resources (ASX:SFR).

Potential for development of low-cost SXEW plant

Given the results indicate leaching of the oxide copper material could be economically viable with relatively low acid consumption and high copper recoveries, management is considering the development of a solvent extraction, electrcotwinning (SXEW) operation.

Should this be the case, it is anticipated that a copper cathode producing plant could be established within a short lead time and at relatively low capital and operating costs.

It should be noted here that PMY remains a speculative stock and investors should seek professional financial advice if considering this stock for their portfolio.

With regard to the geological characteristics, copper mineralisation is flat lying, beneath about 25 metres of unconsolidated sands. During 2010 and 2011, SFR carried out an extensive drilling program targeting primary sulphide copper mineralisation, of which 17 RC holes and 1 diamond hole intersected significant flat-lying oxide copper mineralisation over an area of about 160,000 square metres.

The intersection thickness averages 8 metres using 0.4 per cent copper cut-off, and results in an average grade of about 1 per cent copper. The primary rock is dolomitic, however the carbonate minerals have been almost completely leached out, as reflected by the low acid consumptions in the testwork.

Only 500 metres of the sub-outcropping strike of mineralisation has been tested previously. Consequently, there is significant scope for exploration upside as about 10 kilometres of near surface strike within the BWJV tenements is virtually untested. The oxide copper mineralisation is open to the South South-East and there is the likelihood of further lenses to the North-West.

Work has commenced on estimating an inferred resource in the area of detailed diamond and RC drilling by Sandfire and to set an Exploration Target estimate based on the potential strike extent.

Two composite samples from Sandfire’s drill core were sent to SGS Metallurgy in Perth for acid leach testwork, and the preliminary test results show encouraging copper leach extractions at relatively low acid additions (37kg/t and 44kg/t) for both.

pacifico drill results

Aircore program to establish extent of strike extensions

A 2000 metre aircore program is planned for November to test the strike extensions to the NW and SSE of previously intersected oxide copper mineralisation, and also for indications of significant down-dip primary sulphide mineralisation. Holes will be drilled on lines 1 kilometre apart, with a hole spacing along the lines of 100 metres, to an average depth of 50 metres.

If the preliminary program is successful, the entire strike length will then be explored with aircore drilling. RC drilling programs, some PQ diamond drill holes, and more comprehensive testwork on the drill chips and core would then be planned to define inferred and indicated resources.



General Information Only

S3 Consortium Pty Ltd (S3, ‘we’, ‘us’, ‘our’) (CAR No. 433913) is a corporate authorised representative of LeMessurier Securities Pty Ltd (AFSL No. 296877). The information contained in this article is general information and is for informational purposes only. Any advice is general advice only. Any advice contained in this article does not constitute personal advice and S3 has not taken into consideration your personal objectives, financial situation or needs. Please seek your own independent professional advice before making any financial investment decision. Those persons acting upon information contained in this article do so entirely at their own risk.

Conflicts of Interest Notice

S3 and its associated entities may hold investments in companies featured in its articles, including through being paid in the securities of the companies we provide commentary on. We disclose the securities held in relation to a particular company that we provide commentary on. Refer to our Disclosure Policy for information on our self-imposed trading blackouts, hold conditions and de-risking (sell conditions) which seek to mitigate against any potential conflicts of interest.

Publication Notice and Disclaimer

The information contained in this article is current as at the publication date. At the time of publishing, the information contained in this article is based on sources which are available in the public domain that we consider to be reliable, and our own analysis of those sources. The views of the author may not reflect the views of the AFSL holder. Any decision by you to purchase securities in the companies featured in this article should be done so after you have sought your own independent professional advice regarding this information and made your own inquiries as to the validity of any information in this article.

Any forward-looking statements contained in this article are not guarantees or predictions of future performance, and involve known and unknown risks, uncertainties and other factors, many of which are beyond our control, and which may cause actual results or performance of companies featured to differ materially from those expressed in the statements contained in this article. S3 cannot and does not give any assurance that the results or performance expressed or implied by any forward-looking statements contained in this article will actually occur and readers are cautioned not to put undue reliance on forward-looking statements.

This article may include references to our past investing performance. Past performance is not a reliable indicator of our future investing performance.